Dan Dugan Sound Design E-2 - Manual (Page 37)

Dugan Model E-2 User Guide Dugan Control Panel Software
37
The Top Pane
The Top Pane displays all connected Dugan units. The selected unit is enclosed by a
yellow rectangle. Click on another unit to select it and deselect the previous unit.
Figure 5-2 Top Pane
If all connected units do not appear in the Top Pane, see Establishing Network Con-
nections.
To display a unit’s IP address, hover the mouse over the unit’s name.
To display a unit’s IP address, touch and hold the unit’s name.
Adding Units Manually
To add a unit manually with a known IP address, click the + sign at the right of the
Top Pane and enter the IP address in the dialog that appears.
To add a unit manually without a known IP address:
1. Power down the Model E-2.
2. Hold down Channel 1’s mute button and power up the unit.
This sets a default IP address: 192.168.1.xx.
xx = last two digits of serial number, unless they are 00, in which case enter 100.
3. Click the + sign at the right of the Top Pane.
4. Enter the default IP address.
5. Click OK to exit the dialog.
To display a unit’s IP address, hover the mouse over the unit’s name.
iPad