Pre-listening to muted channels – Dan Dugan Sound Design E-2 User Manual
Page 34

Dugan Model E-2 User Guide
34
Pre-listening to Muted Channels
If your console allows listening to a mic before the insert point, you can mute on the
Dugan.
If signal through the Dugan is required to pre-listen to a mic, pull the fader down and
put the channel in
bypass
mode. When your mic check is done, switch the channel
back to
auto
mode, and raise the fader so the Dugan can cue in the mic.
This manual is related to the following products: