System components overview – d&b T-Series User Manual
Page 7
2.1.1. System components overview
Pos.
Component
Description
[1]
Z5370 T Flying frame
T Flying frame
SWL: 250 kg (550 lb)
Z537000000001
Z055000000001
The Z5370 T Flying frame is designed to support arrays consisting of
the following T-Series loudspeakers:
Code
Type
Weight incl. rigging comp.
Z0550
T10
11 kg (24 lb)
Z0560
T-SUB
17 kg (37 lb)
The weight of the Flying frame including all rigging components is 12 kg
(26.5 lb).
[2]
Center bar
Center bar of the Flying frame with hole index and user instruction
label.
The main hole index at the top of the center bar provides a total of 37
holes numbered with an increment of five. Using the T Load adapters
the Flying frame can be suspended from one or two pick points (please
refer to section 3.3.1 Single pickpoint operation on page 15 and
section 3.3.2 Dual pickpoint operation on page 16).
[3]
[4]
T Load adapter
Park position
The Flying frame is supplied with two Load adapters. Each Load
adapter is equipped with a 1 t shackle to allow single or dual pickpoint
operation (please refer to section 2.3 T Load adapter on page 10).
During transport the Load adapters should be stored in their park
position [4].
[5.1]
[5.2]
Locking pins Splay link
Locking pins Front links
Four Locking pins are provided with the Flying frame and are used to
connect T-Series cabinets to the frame (please refer to section 2.2 T-
Series Locking pins on page 9).
[6]
Safety point(s)
The Flying frame is supplied with two safety points. Each safety point is
equipped with a 1 t shackle to attach a secondary safety device (please
refer to section 3.4 Secondary safety on page 17).
[7]
Additional holes
Two additional holes 12.5 mm each are provided in the side bars of the
frame. These can be used for horizontal aiming and securing the array
against rotation (please refer to section 3.5 Horizontal aiming and
securing on page 18).
[8]
Mounting plate
The Flying frame is equipped with an additional mounting plate
providing four M4 threaded inserts to accept inclinometers such as the
Teqsas LAP-TEQ line array positioning tool.
T-Series Rigging manual
(1.1 EN)
Page 7 of 44