d&b T-Series - Manual (Page 6)

2. T-Series rigging concept
T-Series cabinets are mechanically connected to the T Flying frame and
subsequent loudspeakers using the Front links attached to both sides of
the cabinet front and the central Splay link at the rear of the cabinet.
All necessary rigging components are mounted to the cabinet and slide
out when needed.
The T-SUB cabinets can also be attached to the T Flying frame either at
the top of an array with subsequent T10 loudspeakers attached or as a
column of T-SUBs.
2.1. Z5370 T Flying frame
The Z5370 T Flying frame is equipped and supplied with the following
rigging components:
Fig. 1: Z5370 T Flying frame (rear view)
T-Series Rigging manual (1.1 EN) Page 6 of 44