Add further t10 cabinets – d&b T-Series User Manual
Page 21

4. Add further T10 cabinets
- Preselect the desired splay angle on the upper cabinet.
- Slide and fold out the Front and Splay links of the next cabinet.
- On the rear hook the Splay link of the next cabinet over the preset
Locking pin of the upper cabinet.
- Lower the cabinet to enable the second Locking pin to be inserted.
- Insert the second Locking pin (safety pin) to secure the Splay link of
the cabinet.
- Release the Locking pins at the front of the upper T10 cabinet.
- Raise the bottom cabinet.
- Align the cabinets so as to enable the Locking pins to be inserted
through the Front links of the bottom cabinet.
- Insert and lock the Locking pins on both sides.
- To add further cabinets proceed in the same manner until the
assembly is completed.
T-Series Rigging manual
(1.1 EN)
Page 21 of 44
- D12 Hardware (28 pages)
- D12 Software (36 pages)
- D80 (84 pages)
- D6 Hardware (24 pages)
- D6 Software (32 pages)
- D80 Touring rack NEMA L21-30 (15 pages)
- J-Series (34 pages)
- TI 385 d&b Line array design (54 pages)
- xA-Series (23 pages)
- Y-Series (46 pages)
- Vi (37 pages)
- Z5053 Ci90 Bracket connector (10 pages)
- Z5017 TV spigot HD (6 pages)
- Z5024 Loudspeaker stand adapter (6 pages)
- Z5038 Fixing plate M10 (6 pages)
- Z5048 (4 pages)
- Z5056 M4 Flying bracket (6 pages)
- Z5057 M6 Flying bracket (6 pages)
- Z5091 Ci Flying bracket (6 pages)
- Z5147 Rota Clamp (8 pages)
- Z5350 E8 Flying bracket (6 pages)
- Z5351 E8 Horizontal bracket (6 pages)
- Z5352 E12 Flying bracket (6 pages)
- Z5353 E12 Horizonal bracket (6 pages)
- Z5356 E5 Ball joint adapter (7 pages)
- Z5355 E12 (10 pages)
- Z5371 T Flying bracket (8 pages)
- Z5372 T Horizontal bracket (8 pages)
- Z5373 T Cluster bracket (10 pages)
- Z5374 Ti Flyingadapter (10 pages)
- Z5375 T Base plate (8 pages)
- Z5377 E6 Swivel bracket (6 pages)
- Z5378 E6 Horizontal bracket (6 pages)
- Z5385 V Flying adapter (11 pages)
- Z5386 V Stack adapter (7 pages)
- Z5389 Bi6-SUB Horizontal bracket (10 pages)
- Z5394 Y Flying adapter (13 pages)
- Z5396 Y Base plate (10 pages)
- Z5397 YP Swivel bracket (10 pages)
- Z5398 YP Horizontal bracket (12 pages)
- Z5399 YiP Mouting bracket (8 pages)
- Z5401 Wall mount S (11 pages)
- Z5403 Wall mount (17 pages)
- Z5406 Flying bracket (13 pages)