d&b T-Series - Manual (Page 19)

4. T-Series arrays and assembly
WARNING!
Due to the compact and lightweight T-Series cabinets and
rigging components the assembly may be carried out by a
single person.
However, during assembly or dismantling the array could
suddenly move or swing.
- Therefore carry out the setup with two persons with one
person securing the Array.
- Ensure no other person remains in the vicinity of the
assembly area.
T-Series loudspeakers and T Flying frames can be assembled in the
following ways.
T10 Array
(Refer to section 4.1.1
starting from page 20) T-SUB column
(Refer to section 4.1.2
starting from page 23) T-SUB/T10 Array
(Refer to section 4.1.3
starting from page 25) T Ground stacks
(Refer to section 4.2
starting from page 32)
T-Series Rigging manual (1.1 EN) Page 19 of 44