CRU Ditto Forensic FieldStation User Manual
Page 5
5
Protecting Your Digital Assets
TM
Ditto Forensic FieldStation User Manual
e. Type the Ditto Forensic FieldStation’s destination IP address into your web browser. This is the default
IP address for the destination Ethernet port is
10.10.10.1
. If you have changed the address and do not
remember it, continue to the next step. Otherwise, go down to the last step of this section.
f. Press the
Down
navigation button on the Ditto Forensic FieldStation until you reach the “Settings”
menu. Then press
Enter
.
Settings
View/Edit >
g. Press the
Up
or
Down
navigation buttons until you reach the “Dest. IP Address” screen.
h. Type the IP address shown into your web browser.
Dest. IP Address:
10.xxx.xxx.xxx
i. Log into the browser interface (the default user name and password for the administrator account are
both “
admin
”).
CRU recommends that you change the admin account password and create user accounts for individual
users as best data management practices.
You are now ready to use the browser interface to configure settings and preview, image, or clone
attached disks.
3.2 ICONS USED IN THE BROWSER INTERFACE
The browser interface uses several icons that may be clicked on to perform certain actions.
ICON
ACTION
Information
Opens a window with a brief description of the setting the information icon appears
next to.
Refresh
Refreshes the field that the icon appears next to in order to give updated information.
Reset
Loads the defaults for the setting that the Refresh icon appears next to.
3.3 USER ACCOUNTS
The Ditto Forensic FieldStation employs a user account system to control access to its features. The “Login”
screen presents you with the ability to log in through http, or you can click the
Secure Login (HTTPS)
link to
log in securely. Accept the certificate and/or continue to the website, even if your browser tells you it does
not recognize it.
NOTE