CRU Ditto Forensic FieldStation - Manual (Page 37)

37
Protecting Your Digital Assets TM
Ditto Forensic FieldStation User Manual
13 TECHNICAL SPECIFICATIONS
Product Name Ditto Forensic FieldStation
Data Interface Types &
Speeds
• eSATA: up to 3 Gbps
• 1000BASE-T EtherNet: up to 1 Gbps
• PATA/IDE: up to 133 MB/s
• USB 2.0: up to 480 Mbps
Supported Disk Types 2.5” and 3.5” rotational or solid state hard disks
SD Card Slot Support SD, SDHC (MMC, mini-SD, and microSD are compatible with adapters)
Data Connectors
• Three (3) eSATA ports
• Two (2) 1000BASE-T Ethernet connectors
• One (1) PATA/IDE connector
• One (1) USB 2.0 connector
• One (1) SD Card slot
• One (1) Ditto Expansion Module connector
Write-Blocked Data Inputs
eSATA, PATA/IDE, USB 2.0. Source-side Ethernet port. Other input types supported with Ditto
Expansion Modules or drive adapters.
Data Outputs Two (2) eSATA operable as single, dual, or mirrored. Both 1000BASE-T Ethernet ports.
Supported
File Systems
ext2, ext3, ext4, FAT32, HFS+, NTFS, XFS
User Interface
• Four-line LCD controlled with four soft-touch menu navigation buttons
• Browser-based Ditto interface allows for direct operation, remote operation, and administra-
tion
LED Indicators
Power in 5V/12V, USB, Source Network, IDE, eSATA, Expansion, HPA/DCO, Destination Net-
work, eSATA A, eSATA B
Stealth Mode Turns off all lights (LEDs/LCD)
Browser Compatibility Internet Explorer, Firefox, Safari, Chrome, Opera
Physical Image Types DD, E01
Logical Image Types L01, LIST, TAR, ZIP
Image/Clone Output
Modes
Single disk image, single disk clone, image and clone, image to mirrored disks, clone to mirrored
disks, logical image to single disk, logical image to mirrored disks
Hash Modes
None, MD5, SHA-1, MD5 + SHA-1, enabled during imaging and cloning operations. Hashing while
using both MD5 + SHA-1 significantly reduces performance.
Erase Modes
Clear Partition Table, Quick Erase, Custom Erase, Secure Erase Normal, Secure Erase Enhanced,
DoD Clear, DoD Sanitize, NIST800-88 Clear, NIST800-88 Purge
External material All-aluminum construction
Operating Humidity 5% to 95%, non-condensing
Power Switch 2 position: On / Off
Power Inputs 40W 12V 3.33A DC barrel connector (center pin positive), 15-pin standard SATA power
Compliance
• EMI Standard: FCC Part 15 Class A
• CE
• EMC Standard: EN55022, EN55024
• C-Tick