CRU Ditto Forensic FieldStation - Manual (Page 24)

24
Protecting Your Digital Assets TM
Ditto Forensic FieldStation User Manual
7 LOGS SCREEN
The “Logs” screen provides information about the Ditto Forensic FieldStation’s actions. Click on the Logs tab to
access the “Logs” screen from the browser interface.
Action logs show the timestamp, the type of action performed, the user who performed the action, and a link to
the “Action Log” screen that provides more information about the performed action.
7.1 ACTION LOG
7.1.1 Settings
Displays the settings of the Ditto Forensic FieldStation that were active when the particular action was
performed.
7.1.2 User Permissions
Displays the permissions of the user that were in place when the particular action was performed.
7.1.3 Extended Disk Info
This report displays the information of the disk used (which is noted in the title of this report) in the action,
including the interface, model, serial number, capacity, the presence of HPAs (host protected areas) or
DCOs (device configuration overlays), partition information, hdparm information, and S.M.A.R.T informa-
tion. If multiple disks are used in the action, then multiple reports are created.
7.1.4 Logical Image Report
This report appears in action logs of “Logical Image Source Disk” actions and displays each directory
and file that was imaged, along with their size and any error messages that were generated. Click on the
Export button to save a copy of the log as an Excel spreadsheet.
Figure 23. The “Logs” screen.