CRU Ditto Forensic FieldStation - Manual (Page 2)

2
Protecting Your Digital Assets TM
Ditto Forensic FieldStation User Manual
TABLE OF CONTENTS
1 Pre-Installation Steps 2
2 Setup 3
3 Browser Interface 3
3.1 Accessing the Browser Interface 3
3.2 Icons Used in the Browser Interface 5
3.3 User Accounts 5
4 Home Screen 6
4.1 Action 6
4.1.1 Clone Source Disk 6
4.1.2 Physical Image Source Disk 7
4.1.3 Logical Image Source Disk 8
4.1.4 Clone and Image Source Disk 9
4.1.5 Erase Destination Disk 10
4.1.6 Hash Disk 11
4.1.7 Snapshot Disk 11
4.2 Investigation Info 12
4.3 System Settings 12
4.4 Current Status 12
4.5 Disks 12
4.6 System Log 14
5 Configure Screen 14
6 Admin Screen 22
6.1 User Accounts 22
6.2 Permission Levels 22
6.3 Adding a New User 23
6.4 Editing an Existing User 23
6.5 Deleting a User 23
7 Logs Screen 24
8 Utilities Screen 25
9 Using the Front Panel Interface in Standalone Mode 26
10 Stealth Mode 28
11 Advanced Features and Functions 29
11.1 Netview Scan 29
11.2 Target Mode: Remotely Access Disks Attached to the
Ditto Forensic FieldStation with Third Party Software
31
11.3 Using iSCSI Devices 32
11.4 Using NFS and SMB (Samba) Shares 35
12 Upgrading Firmware 36
13 Technical Specifications 37
1 PRE-INSTALLATION STEPS
1.1 PACKAGE CONTENTS
The following list contains the items that are included in the
complete configuration for this device. Please contact CRU if
any items are missing or damaged:
Ditto Forensic FieldStation Unit 1
Unitized SAS-to-eSATA + Mini-Fit power cable 3
IDE cable 1
12V power supply 1
Power cord 1
Legacy power-to-Mini-Fit cable 1
Ethernet cable (RJ45) 1
2.5” IDE-to-3.5” IDE and Mini-Fit cable 1
Power adapter, legacy-to-SATA 1
Velcro cable wrap 6
eSATA cable 2
SD card (pre-installed) 1
Quick Start Guide 1
1.2 IDENTIFYING PARTS
Take a moment to familiarize yourself with the parts of the
Ditto Forensic FieldStation. This will help you to better under-
stand the following instructions.
TOP OF UNIT
Power Available LEDs
LCD Menu
Source LEDs
Destination LEDs
Navigation Buttons for LCD Menu