CONTA-CLIP GSM-PRO Portal - Manual (Page 7)

GSM-PRO PORTAL
- 6 -
3.2.2
By sms
It is possible to configure the Portal software by sending an SMS: PORTAL:. E.g.
PORTAL80.128.128.123:6000.
NOTE: it is not possible to turn the Portal functionality OFF with an SMS.
3.3
Starting the Portal
On startup the Portal software requires the IP address from the PC on which the software is running from and the
port you chose to use. If you do not know your remote IP address:
• access your Windows start menu
• Open the Command Prompt:
For Win7 in Start -> Search programs and files type “CMD”
For WinXP in Start -> Run type “CMD”
• In the Command Prompt type: ipconfig
• Search your IP address next to IPv4
Press the connect button to start the Portal. All modules configured to connect to the Portal will do so within 2
minutes.
NOTE: If a module could not connect to the Portal for a time of 12 hours it performs a restart. This is to prevent
GSM network connectivity failure.
NOTE: Trying to connect to the Portal while the Portal is not running uses about 100k data per hour.