CONTA-CLIP GSM-PRO Portal - Manual (Page 5)

GSM-PRO PORTAL
- 4 -
2
SOFTWARE
Download the latest GSM-PRO Portal software at:
http://www.conta-clip.com/en/service/
On start up the interface software checks if there is a new interface available. To manually check for updates
click: About -> check for updates.
NOTE: checking for updates requires an internet connection.
2.1
System requirements
The following requirements are needed to run and use the software properly:
• Windows XP sp3, Vista, 7
• Minimal 1024 x 768 pixels screen resolution
• 100MB Hard disc capacity available
• 256MB RAM
• Internet connection
2.2
Software installation
Run the GSM-PRO_PORTAL_setup.exe to install the application. The setup wizard will guide you through the
rest of the setup process.
After starting the interface set the language. The chosen language is saved and recalled at start up.
2.3
Dongle
The Portal is free to use for 2 GSM-PRO modules. If you want to use more modules connect the Portal Dongle to
your PC (artnr. 16155.2, sold separately, please contact Conta-Clip for further information).
NOTE: when inserting the dongle for the first time it could take a few minutes for hardware configuration to
complete.