CONTA-CLIP GSM-PRO Portal - Manual (Page 12)

GSM-PRO PORTAL
- 11 -
The color of the LED and below the value indicate the status of the output.
4.2.3
Events
The bottom right lists the latest events from the selected module. The GSM-PRO shares the following events
with the Portal:
• Module is connected
• Module is disconnected
• Digital input changed
• Analog input threshold exceeded
• (Multiple) Digital output(s) changed
• Periodical message
• Power down message
• Power cycle message
• Log file full
• Firmware update
• Configuration update
If a new event is received, it is added to the event list and marked with font-style bold as unread. When you click
the event it is marked as read with normal font-style.
Right click on the event list to open a sub menu where you can mark all events as read, delete all events or export
the events to a *.txt file.
Right click on “modules” in the tree-view and select “mark all as read” to mark the tree-view, data-grid and
event-list as read.
Note: if you mark or delete all events the data-grid in the module overview and the tree-view will set the
complete row for this module as read.
4.3
Read All
The Portal can ask for a IO status for one or all modules on a time given base or manual. To manual refresh a IO
status right click on the module in the tree-view on the desired module and select “refresh”. To refresh all IO
statuses right click on “modules” in the tree-view and select “refresh all”.
To refresh all modules automatically right click on “modules” click “refresh timed (min)” and select a rate in
minutes.