CONTA-CLIP GSM-PRO Portal - Manual (Page 10)

GSM-PRO PORTAL
- 9 -
4
MONITORING
4.1
Module overview
After the Portal is started all configured modules connect within 2 minutes. On the left side the modules are
listed in a tree-view, on the right side the modules are listed with status overview in a data-grid. In both
overviews the modules are sorted by module name.
4.1.1
tree-view
When a module is added to the tree-view it is preceded by an enumeration: “nr| ”. This way in longer lists the
link between the data-grid and the tree-view is easier found.
In the tree-view the module can adopt the following statuses with font-styles and icons:
Module is connected
Module is disconnected
Module has a new event (see chapter 4.3)
Portal is waiting for the module to connect (see chapter 4.4)
4.1.2
data-grid
The data-grid shows the modules name with the status of all IO’s. After the module name the 8 UI’s are shown
with the values 1 or 0 in case of a digital input or the value + unit in case of an analog input. Next the 4 digital
outputs are shown with the status 1 or 0.
If the module sends a new event the referring cell in the data-grid is marked yellow and the font-style is set to
bold. Click on a cell to mark it as read with normal font-style and no marking.
When a module is disconnected the font-style is set to red.