CONTA-CLIP GSM-PRO Portal - Manual (Page 17)

GSM-PRO PORTAL
- 16 -
5.2.2 OTA configuration
The GSM-PRO can be configured remotely. To activate this right click on the selected module and click
“ROTAC”. The module now uploads the settings to the server. When ready the module answers “configuration
file uploaded”.
Fill the unique module International Mobile Equipment Identity (IMEI) into the user interface and press
“download configuration”. The user interface will be automatically updated with the settings of the (remote)
module.
NOTE: Right click the module and select “Copy to Clipboard” to copy the IMEI number.
After making the required changes to the configuration, press “upload configuration” to upload the new
configuration onto the server.
Finally right click on the selected module and click “COTAC” to inform the module that the new configuration
is online. It will download the configuration and resets, this will take about one minute. The module answers:
“configuration file updated”.
See the GSM-PRO manual for further information on the Over The Air Configuration.
5.2.3
Restart device
A GSM-PRO can be restarted by the Portal. Right click the selected module and click “reset”. The module
disconnects and reconnects within 2 minutes.