CIRCUTOR CDP-0 - Manual (Page 50)

CDP
50 Instruction Manual
6.1.2. Power control & Data logger
In this part,
Figure 67 , five groups of parameters are displayed:
 Those related to the model and number of inverters: Inverter.
 Those related to inverter control: Control.
 Those related to the operation of the reverse current control relay:
Reverse current relay.
 Those related to managing non-critical loads: Auxiliary load relays.
 That related to the data log generated: Data logger.
Figure 67: Setup web site: Power control & Data logger.
6.1.2.1. Inverter
In this section you can select:
• Inverter type: Inverter model to be used in the installation. All inverters
connected to the CDP must be of the same type.
If you select the option Generic 4 inputs, the parameter Mode appears on the
screen with two possible options (
Figure 68 ):
Discrete: this option allows 4 regulation stages: 0%, 30%, 60% and 100%.