CIRCUTOR CDP-0 - Manual (Page 44)

CDP
44 Instruction Manual
•
IP
The user configures an IP address for the CDP unit using the setup option.
Figure 54: First setup screen if DHCP is NO.
•
NetMask
To configure the NetMask, press the Scroll RIGHT key, activating the edit cursor
on the first digit. Press the UP and DOWN keys to establish the parameters of a
000.000.000.000 type numeric data entry. After establishing the parameters,
press the RIGHT key repeatedly until the edit cursor disappears and validate the
data with the OK key, moving to the next line.
Figure 55: Second setup screen if DHCP is NO.
•
Gateway
To configure the Gateway, press the Scroll RIGHT key, activating the edit cursor
on the first digit. Press the UP and DOWN keys to establish the parameters of a
000.000.000.000 type numeric data entry. After establishing the parameters,
press the RIGHT key repeatedly until the edit cursor disappears and validate the
data with the OK key, moving to the next screen.
Figure 56: Second setup screen if DHCP is NO.
•
Primary DNS
To configure the Primary DNS press the RIGHT key, activating the edit cursor on
the first digit. Press the UP and DOWN keys to establish the parameters of a
000.000.000.000 type numeric data entry. After establishing the parameters,
press the RIGHT key repeatedly until the edit cursor disappears and validate the
data with the OK key, moving to the next line.
Figure 57: Third setup screen if DHCP is NO.