CIRCUTOR CDP-0 - Manual (Page 17)

CDP
Instruction Manual 17
If the maximum number of reconnection attempts defined in the Max
Disconnections parameter is reached within the time defined in the maximum
reconnection period, Disconnect. Timeout parameter, the unit definitively
activates the alarm.
Figure 9: alarm reconnection sequence.
The following indications appear in the CDP when the reconnection sequence
has been completed:
• Alarm LED: The alarm LED is activated in the CDP indicating that power
is being injected into the grid and that the reconnection sequence is
complete.
Figure 10: Inverse current relay alarm.
• Unit screen: A screen appears on the CDP indicating that the unit has
activated the inverse current protection relay, and there is an option to
unlock it. The option NO appears on the home screen; this can be
changed with the UP and DOWN keys to YES. Press the OK key to
validate the selected option.