Maintenance and technical service, Warranty – CIRCUTOR CIRe3 Series User Manual
Page 49
CIR-e
3
Instructions manual
Pag. 49 of 50
10 MAINTENANCE AND TECHNICAL SERVICE
In the event of questions or concerns regarding operation or malfunction of the equipment,
notify Technical Assistance Service (S.A.T.) of CIRCUTOR, SA.
Technical assistance Post-sales Department
Vial Sant Jordi, s/n –
08232 – Viladecavalls
Barcelona – Spain
Tel: 902 449 459 ( Spain) / +34 937 452 900 (International)
e-mail:
Web:
11 WARRANTY
CIRCUTOR warrants its products in case of manufacturing defects for a period of two years
from the delivery of the equipment.
CIRCUTOR will repair or replace defective products returned within the warranty period.
No returns will be accepted nor will repair or replace any equipment if not
accompanied by a report explaining the observed defect or the reason for the return.
The warranty is void if the equipment has been subject to "misuse" or the customer did not
follow the instructions for storage, installation and maintenance contained in this manual. We
understand as "misuse" any use situation contrary to National Code or exceeding the limits
given in the section on technical and environmental characteristics of this manual.
CIRCUTOR declines all responsibility for any damage to equipment or other parts of the facility,
caused by a bad installation or "misuse" of the equipment.
Consequently, this warranty does not apply to faults caused in the following cases:
1. Faults due to overvoltages and / or electrical supply disruptions
2. Faults due to water or humidity, if the IP rating of the product is not suitable.
3. Faults due to lack of ventilation and / or excessive temperatures
4. Faults due to improper installation and / or lack of maintenance
5. In case that the equipment has been serviced, repaired or modified without authorization
from CIRCUTOR