CIRCUTOR CIRe3 Series - Manual (Page 36)

CIR-e 3
Pag 36 of 50 Instructions manual
Fig. 6-30.- Name and description of loaded file
Data requested in this template are:
Report name: The report configured before the data are recorded by the CIRe.exe application
will be displayed by default in the space used to enter the name of the report. You can
change this name. This field is limited to 16 characters.
Report description: By default, this space shows the name given to the report. The user can
change this name and give a short description of the data (including for example origin or
working conditions). This field does not have a character limitation.
To send the data to the Web application, click on “Accept”.
In case of error transferring data, because of file size or in case that the data file is not found
(file must have .std extension and shall be placed in the root directory of the memory card), the
application will display the following error window (Fig. 6-31).
Fig. 6-31.- Error message
Click on “Accept”. If no errors are detected, the application will encrypt the data and send them
to the Web page. During this process, the application will display the following window.
Fig. 6-32.- Message indicating that file has been sent
If there is an error in the data operation page, the application will display an error message with
an error code indicating the error cause and displaying the following message: “The file can
not be sent to the server. Error code….”. The error codes are shown in Table 6-3
Table 6-3.- Error codes during file uploading
Code Causes Solution
0
The file could not be opened or it does not
exist Make sure that the *.std file is in
the root directory of the SD card
1 to 16 Incorrect transfer or Web server function Check the Internet connection
500
The user has exceeded the limit of 10 reports
sent to the Web and he is not allowed to send
a new one.
You must delete your account
before posting new reports.