CIRCUTOR CIRe3 Series - Manual (Page 23)

CIR-e 3
Instructions manual Pag. 23 of 50
Fig. 6-12.- Window appearing when CIR-e.exe is executed the first time
6.3.2 Menu options.
The application has 4 different function buttons. “Configure”, “Connect” “Exit” and “Send to
Web”.
6.3.2.1 Configure
Select the configure option to create a new file with the installation's features for a CIR-e³.
The following window will be displayed when the user clicks on “Configure”.
Fig. 6-13.- Set-up window
Serial number: Enter the 10 digits of the serial number of the CIR-e³ unit used to take the
measurements. The serial number identifies each individual unit. It is written on a label on
the back of the analyzer: “serial no.” starting with 0102XXXXXX.
The software uses part of the serial number as filename of the configuration file (identifier).
The setup file generated by the application will be named as xxxxxxxx.xst format, where
“xxxxxxxx” are the last eight digits of the unit's serial number.