Denon S-301 User Manual

Page 61

ENGLISH

System Setup

ENGLISH

MEDIUM:

Select this to make the brightness of the main unit’s display
medium.

BRIGHT (Factory default):

Select this to make the brightness of the main unit’s display
bright.

DIM:

Select this to make the brightness of the main unit’s display
dark.

OFF:

The main unit’s display is off and turns on when an operation
is performed.

When “DISPLAY” is selected:
Press the

CURSOR •

button to select the

desired setting item, then press the

ENTER

button.

-4

When “DIM SENSOR” is set to “OFF”, the brightness of
the main unit’s display can be set in the following four steps.

GRAY:

Select this to display a gray background on the TV display.

BLUE (Factory default):

Select this to display a blue background on the TV display.

BLACK:

Select this to display a black background on the TV display.

PICTURE:

Select this to display the background image used on the
“HELP” screen on the TV screen.

-2

When “WALL PAPER” is selected:
Press the

CURSOR •

button to select the

desired setting item, then press the

ENTER

button.

ON (Factory default):

Select this to enable the illuminance sensor and automatically
adjust the brightness of the main unit’s display and buttons
within a set range. The brightness increases if the
surroundings are bright and decreases if the surroundings are
dark.

OFF:

Select this to disable the illuminance sensor and adjust the
brightness of the main unit’s display manually.

When “DIM SENSOR” is selected:
Press the

CURSOR •

button to select the

desired setting item, then press the

ENTER

button.

-3

ON:

The function for automatically turning the power off when the
function is set to DVD is activated.

OFF (Factory default):

The auto power off function is not activated.

When “SLIDE SHOW” is selected:
Press the

CURSOR •

button to select the

desired setting item, then press the

ENTER

button.

-5

-6

When “AUTO POWER MODE” is selected:
Press the

CURSOR •

button to select the

desired setting item, then press the

ENTER

button.

5 ~ 15SEC (Factory default : 5 SEC):

The interval can be set from 5 to 15 seconds in steps of 1
second.