Denon S-301 - Manual (Page 23)

ENGLISH
ENGLISH
20
Basic Operation Basic Operation
2 Switching the audio language
(Multiple audio function)
1
During playback, Press the AUDIO/PTY button.
• The current audio language number is displayed.
Press the CURSOR • or ª button to select the
desired language.
• The display turns off when the AUDIO/PTY button is
pressed.
2
With DVDs containing multiple audio language signals, the audio
language can be switched during playback.
• With some discs it is not possible to change the audio language
during playback. In such cases, select from the “SETUP”
menu.
• The language selected in the default settings ( page 47) is
set when the power is turned on and when the disc is replaced.
2 Switching the subtitle language
(Multiple subtitle function)
1 During playback, Press the SUBTITLE/RT
button.
• The current audio language number is displayed.
Press the CURSOR • or ª button to select the
desired language.
• The display turns off when the SUBTITLE/RT button is
pressed.
2
With DVDs containing multiple subtitle language signals, the
subtitle language can be switched during playback.
2 Switching the angle
(Multiple angle function)
1
During playback, Press the ANGLE/CT button.
• The current angle number is displayed.
Press the CURSOR • or ª button to select the
desired angle.
• The display turns off when the ANGLE/CT button is
pressed.
2
With DVDs containing multiple angle signals, the angle can be
switched during playback.
Stopping playback
During playback, press the 2 2 button.
• Playback stops and wall paper is displayed.
2 Resume play memory function (DVD only)
• With the S-301, when the 2 2 button is pressed, that position is
stored in the memory. At this time, “ 1 ” flashes on the display.
When the 1 button is pressed after pressing the 2 2 button,
playback resumes from the position at which it was stopped.
The resume play memory function is canceled if the disc tray is
opened or the
2 2 button is pressed a second time.
• The resume play memory function only works for discs for
which the elapsed time is shown on the display during
playback.
2 Auto power off function
• The S-301 is equipped with a function that automatically
switches the power to standby if no operation is performed for
30 minutes while in the stop mode with the function set to
DVD.
• This function is set to off upon shipment from the factory. If you
wish to turn it on, set the “AUTO POWER MODE ” ( page
58) setting to “ON”.
Playing still pictures (Pausing)
During playback, press the 3 3 button.
• Press the 1 button to resume normal playback.