Denon S-301 - Manual (Page 34)

31
ENGLISH
Basic Operation Basic Operation
ENGLISH
2 Press the SURROUND button to select the
surround mode.
• The surround mode switches as shown below each
time the SURROUND button is pressed.
STEREO DOLBY VS WIDE DOLBY VS REF.
ROCK ARENA JAZZ CLUB
4
Start playback on the selected component.
The volume can be adjusted within the range –60 to 0 to
+18 dB. Note that depending on the input signal, surround
mode, speaker settings and channel level setting, it may not
be possible to adjust the volume up to +18 dB.
Function setting
1 Press the FUNCTION button on the main unit,
and DVD , TUNER or AUX button on the remote
control unit to select the input function to be
played.
• The function switches as shown below.
When the FUNCTION button on the main unit is pressed:
iPod TUNER DVD
AUX1 AUX3 AUX2
Portable
(Front IN)
USB
When the AUX button on the remote control unit is
pressed:
AUX3 AUX2
iPod Portable
(Front IN)
AUX1
USB
iPod, USB and Portable are only displayed and
selectable when the corresponding components is
connected.
(Main unit) (Remote control unit)
For operating instructions, refer to the component’s manual.
5
Adjust the volume.
The volume is shown on
the display.
(Main unit) (Remote control unit)
2 To check the currently playing program
source, etc.
Press the STATUS button.
• The current program source and surround settings are shown
on the display each time the button is pressed.
FUNCTION
VOLUME
CURSOR
SURROUND
SURROUND
PARAMETER STATUS
CURSOR
AUX
VOLUME
DVD
TUNER
DVS/CINEMA
3 When “STEREO” is selected:
Press the
SURROUND PARAMETER button,
then press the CURSOR 0 or 1 button to set.
DIRECT ON OFF
DIRECT MODE:
• ON:
The analog input signals are played without DSP processing.
The settings made at “DISTANCE” under “SETUP” (
page 54) are not reflected.
• OFF:
The analog input signals are converted into digital signals and
undergo DSP processing.
The “DIRECT MODE” only functions with analog inputs and
in the stereo mode.
2 Surround parameters q
• DOLBY DIGITAL • DTS
2 Input signal display