Denon S-301 - Manual (Page 57)

ENGLISH
ENGLISH
54
System Setup System Setup
2 Press the CURSOR • or ª button to select
“DISTANCE”, then press the ENTER button.
• The distance setting screen appears.
3 Press the CURSOR 0 or 1 button to select
“FEET” or “METERS” for the “DISTANCE”
mode, then press the
CURSOR ª button.
4 Press the CURSOR • or ª button to select the
speaker, then press the CURSOR 0 or 1 button
to set the distance between the speaker and the
listening position.
• The distance changes by 1 foot (or 0.1 meters when the
unit is set to feet) each time the CURSOR 0 0 or 1 1 button
is pressed. Select the value closest to the measured
distance.
Make sure the difference in the distances set for the
various speakers is no greater than 15 feet (4.5 meters).
If an inappropriate distance is set, “CAUTION: INVALID
DISTANCE” is displayed. Change the position of the
speaker and make the setting over.
To set the distance of the various speakers back to their
default values, press the CURSOR
• or ª button to select
“DEFAULT” then press the ENTER button.
Setting “DISTANCE”
• Input the distances from the listening position and the various
speakers to set the surround delay time.
• Upon shipment from the factory default the distance is set to
the default values in step 4 below.
FR FL
Subwoofer
L1: Distance between front right speaker and listening position
L2: Distance between front left speaker and listening position
L3: Distance between subwoofer speaker and listening position
Preparation:
Measure the distance from the listening position to the various
speakers.
1 Press the CURSOR • or ª button to select
“SPEAKER SETUP” at the “AUDIO SETUP”,
then press the
ENTER button.
• The “SPEAKER SETUP” screen appears.
listening position
Setting “SPEAKER LOCATION”
The optimum acoustics can be achieved by setting the location
of the speakers and the conditions in the room.
1
Press the CURSOR • or ª button to select
“SPEAKER SETUP” at the “AUDIO SETUP”,
then press the
ENTER button.
• The “SPEAKER SETUP” screen appears.
5 Press the CURSOR ª button to select “SETUP
MENU”, then press the ENTER button.
• The “SPEAKER SETUP” screen appears.
6 Press the CURSOR ª button to select “NEXT
SETUP MENU”, then press the ENTER to enter
the setting.
• The next screen in the “SETUP” menu screen appears.