Denon S-301 User Manual

Page 30

ENGLISH

Basic Operation

ENGLISH

Presetting stations that have been tuned in
and giving names to stations (for remote
control unit only)

• A total of 60 stations (including both FM and AM stations) can

be preset.

• Preset stations can be given names with up to 8 characters

(letters, numbers and symbols).

• Preset stations using the including remote control unit.

Tune in the station you want to preset.

P0- FM 2.50M

Press the

MEMO

button twice in a row.

• The name input mode is set.

P0- _

Press the

CURSOR •

button to select the

character, then press the

ENTER

button to input

that character.

P0- F

P0- F_

When the CURSOR

button is pressed, the selected

character is entered, the cursor moves to the next position
and the next character can be input.
When the CURSOR

button is pressed, the selected

character is entered, the cursor moves to the previous
position. Use this to correct characters that have already
been input.

Press the

ENTER

button to enter the station

name you have input.

• The preset number indicator, “P0– ”, flashes.

P0- FM-DENON

Press the

CURSOR •

button to select the

preset number, then press the

ENTER

button to

enter the preset number.

• The preset number, band and reception frequency are

displayed, then the station name appears.

The preset number can also be input directly pressing the
NUMBER buttons on the remote control unit.

P03 FM-92.50M

P03 FM-DENON

• To stop in the middle of the procedure, press the MODE button

before pressing the ENTER button at step 4. Everything you
have input is cleared.

• To clear a station name that has been set in the memory, call

out that station, set the name input mode in step 2, then press
the CLEAR button. The station name is cleared and the preset
channel frequency is displayed.

• If you only want to preset a station, press the MEMO button

once while the station is tuned in. The preset number indicator,
“P0–”, flashes, and the preset number input mode is set. Press
the CURSOR • or ª button to select the preset number, then
press the ENTER button again to store that station at the
selected number. (The number can also be specified directly
using the NUMBER buttons on the numeric keypad.)

FUNCTION

CURSOR

CLEAR

ENTER

MODE

MEMO

NUMBER

DISPLAY

CURSOR

AUX

ENTER