Denon S-301 - Manual (Page 33)

30
ENGLISH
Basic Operation Basic Operation
ENGLISH
Playing and recording other sources
Connecting the portable player
Your portable audio player can be connected to the ADV-S301’s
portable jack to play tracks on the portable audio player.
PORTABLE
AUDIO LINE
OUT
1
Connect the ADV-S301 and portable audio player
using a separately sold mini-stereo audio cable.
Playing a portable audio (stereo mini plug)
IN Front IN
2 Play the portable audio player.
• The signals of the Portable Audio are output through the
S-301.
For instructions on playing the portable audio player, see the
portable audio player’s operating instructions.
Press the FUNCTION button on the main unit or
AUX button on the remote control unit to select
“IN Front IN”.
Connecting the mass storage
Your mass storage device can be connected to the ADV-S301’s
USB connector to play MP3, WMA and WAV files on the mass
storage device.
MASS STORAGE
USB
Connect the ADV-S301 and mass storage device
using a separately sold mini-stereo audio cable.
• Compatible with mass storage devices in FAT16 or FAT32
format.
• If the mass storage device is divided into multiple partitions,
only the files on the drive with the lowest drive number on that
partition are selected.
• To disconnect the mass storage device, press the STOP button
and hold it in for at least 2 seconds, then disconnect the cable.
1
Playing a MP3, WMA or WAV file on the mass
storage
IN USB
2 The files on the mass storage device can be
played using the same operations as described
at “Listening to recorded MP3 or WMA CD-
R/CD-RW” (
page 22).
Press the FUNCTION button on the main unit or
AUX button on the remote control unit to select
“IN USB”.
About analog recording onto an external
audio component (AUX3)
NOTE:
Cautions during analog recording of DVDs or digital input
sources:
• Do not switch the S-301’s input mode, surround mode or
surround parameters during recording. Doing so will
interrupt the sound being recorded.
We recommend setting the surround mode to “STEREO”.
• When using headphones, recording is automatically
performed in the Dolby Headphone mode.
2 When the DVD is selected
Dolby Digital, DTS and PCM digital signals are automatically
converted to 2-channel stereo signals before being output
(except when in the Dolby Headphone mode) and can be
recorded in analog. (For what happens in the Dolby Headphone
mode, see below.)
2 When other functions (analog) are selected
(aside from “AUX3”)
The analog audio signal selected from among the functions other
than DVD is output unchanged, regardless of the S-301’s input
mode or surround mode.
NOTE:
• USB devices does not operate when connected via a USB
hub.
• Please note that operation of and power supply to all USB
mass storage devices is not guaranteed.