Optoma EH200ST - Manual (Page 55)

55
English
Appendices
Image has slanted sides:
If.possible,.reposition.the.projector.so.that.it.is.centered.on.the.
screen and below the bottom of the screen.
Use “Display-->V Keystone” from the OSD to make an adjust-
ment.
Image is reversed
Select “Setup-->Projection” from the OSD and adjust the pro-
jection.direction.
Blurry double image
Press “3D Format” button and switch to “Off” to avoid normal
2D image is blurry double image.
Two images, side-by-side format
Press “3D Format” button and switch to “SBS” for input signal
is HDMI 1.3 2D 1080i side-by-side.
Image does not display in 3D
Check if the battery of 3D glasses is drained.
Check.if.the.3D.glasses.is.turned.on.
When the input signal is HDMI 1.3 2D (1080i side-by-side
half), press “3D Format” button and switch to “SBS”.







