beautypg.com

Connect to 3d video devices, Installation – Optoma EH200ST User Manual

Page 14

background image

4

English

Installation

Connect to 3D Video Devices

The.3D.video.

source.device.

must be

powered on

before.the.3D.

projector.

If.input.video.

is normal 2D,

please.press.

“3D Format”

and switch to

“Auto”.

If.“SBS.Mode”.

is.active,.2D.

video.content.

will not display

correctly.

Once you have connected your devices together with HDMI

cables, as shown in the diagram, you are ready to begin.

Power ON your 3D video source and your 3D projector.

PlayStation

®

3 Games

Make sure that you have updated your console to the latest soft-

ware version.

Go to the “Settings menu -> Display settings -> Video output ->

HDMI”. Select “Automatic” and follow the on-screen instructions.

Insert your 3D game disc. Alternatively you can download games

(and 3D updates) via the PlayStation

®

network.

Launch the game. In the in-game menu, select “Play in 3D”.

Blu-ray 3D™ Player

Make sure that your player can support 3D Blu-ray™ disc and that

3D.output.is.enabled.

Insert the 3D Blu-ray™ disc into the player, press “Play”.

3D TV (e.g. SKY 3D, DirecTV)

Contact your TV service provider to enable any 3D channels on

your channel package.

Once enabled, switch to the 3D channel.

You should see two images side-by-side.

Switch to the “SBS Mode” of the 3D projector. The option is lo-

cated in the “Display” section of the projector OSD menu.

3D Device (e.g. 3D DV/DC) with 2D 1080i side by side signal

output

Connect your 3D device and switch to out 3D content with 2D

side-by-side output to 3D Projector.

You should see two images side-by-side.

Switch to the “SBS Mode” of the 3D projector. The option is lo-

cated in the “Display” section of the projector OSD menu.

If watching 3D content from an HDMI 1.4a source (e.g. 3D Blu-ray)

your 3D glasses should always be in sync. If watching 3D content

from an HDMI 1.3 source (e.g. 3D broadcast using SBS mode) it may

be necessary to use the projector’s 3D Sync-Invert option to optimize

your 3D experience. The option is located in the “Display ->3D” sec-

tion of the projector OSD menu.



-

This manual is related to the following products: