Optoma EH200ST - Manual (Page 47)

47
English
User Controls
All: Choose “All”, the projector can be operated by the remote
control from front or top IR receiver.
Front: Choose “Front”, the projector can be operated by the
remote control from front IR receiver.
Top: Choose “Top”, the projector can be operated by the re-
mote control from top IR receiver.
Off: Choose “Off”, the projector can’t be operated by the
remote control from front or top IR receiver. By selecting “Off”,
you will be able to use the Keypad keys.
2V.Trigger
Off: Choose “Off” to disable the trigger.
On: Choose “On” to enable the trigger.
Auto 3D: When “Auto 3D” is enabled, the projector will auto-
matically detect when a 3D image is shown and will activate
the.trigger.on.this.port..







“Front”.and.“Top”.
can’t be selected
under.standby
mode.

2V.Trigger.A.
Relay Connec-
tor.support.2V,.
250mA. 3.5mm
Mini Jack.

Reserved
IR_IN.&.detect
GND