Optoma EH200ST - Manual (Page 50)

50
English
User Controls
OPTIONS | HDMI
Link Settings
HDMI.Link
Inclusive.of.TV
Power On Link
OPTIONS
Off
.. ..Exit
Advanced
Power Off Link Off
Using.HDMI.Link
When you connect HDMI CEC-compatible devices to the projec-
tor with HDMI cables, you can control them on same Power On
or Power Off status using the HDMI Link control feature on the
projector’s OSD.
This lets one device or multiple devices in a group Power On or
Power Off via HDMI Link Feature.
In a typical confi guration, your DVD player may be connected to
the projector through an amplifi er or home theater system.



When standby
mode is <0.5W
HDMI.Link.fea-
ture will not work.

HDMI.Link
Enable/Disable the HDMI Link function. The Inclusive TV, Power
on Link, and Power off Link options will only be available if the
setting.is.set.to.On.
Inclusive.of.TV
If the setting is set to “Yes”, both TV and projector will be auto-
matically turned off at the same time. To prevent both devices to
be turned off at the same time, set the setting to “No”.
Some HDMI
Link.functions.
may not operate,
depending.on.
the.connected.
product’s design
and compliance
with the HDMI
CEC.standard.

HDMI
Amplifi er
DVD Player HDMI
No
Mutual