Optoma EH200ST - Manual (Page 40)

40
English
User Controls
3D Format is only
supported.on.3D.
Timing on page
3.
“3D Format” is
only supported on
non-HDMI..4a.3D.
timing.


DISPLAY | 3D
3D.Mode
Off: Select “Off” to turn off 3D mode.
DLP-Link: Select “DLP-Link” to use optimized settings for DLP
Link 3D Glasses. (refer to page 16).
VESA 3D: Select “VESA 3D” to use optimized setting for VESA
3D Glasses. (refer.to.page.)..
3D Format
Auto: When a 3D identifi cation signal is detected, the 3D for-
mat is selected automatically.
SBS: Display 3D signal in “Side-by-Side” format.
Top and Bottom: Display 3D signal in “Top and Bottom” format.
Frame Sequential: Display 3D signal in “Frame Sequential”
format.
3D -> 2D
3D: Display 3D signal.
L (Left): Display the left frame of 3D content.
R (Right): Display the right frame of 3D content.
3D Sync. Invert
Press the “On” to invert left and right frame contents.
Press the “Off” for default frame contents.












3D.Mode
3D -> 2D
3D Sync. Invert
DISPLAY
Off.
.. ..Exit
3D
3D
Off
3D Format Auto