Optoma EH200ST - Manual (Page 18)

English
Installation
Powering Off the Projector
...Press.the.“ ” button on the remote control or “ ”.on.the.
Keypad to turn off the projector. The following message
will be displayed on the screen.
Power Off?
Press Power again
.. Press.the.“ ” button again to confirm otherwise the
message will disappear after 15 seconds. When you
press.the.“ ” button for the second time, the projector will
display countdown timer and will shut down.
2.. The.cooling.fans.continue.to.operate.for.about.0.seconds.
for cooling cycle and the On/Standby LED will Flash.
Green..When.the.On/Standby LED lights solid Amber, the
projector has entered standby mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and
has entered standby mode. Once in standby mode, simply
press.“ ”.button.to.restart.the.projector.
3. Disconnect the power cord from the electrical outlet and
the.projector.
4. Do not turn on the projector immediately following a power
off.procedure.