Altera PowerPlay Early Power Estimator User Manual
Page 58
Date
Version
Changes
January 2012
6.0
• Added “HMC Worksheet” section.
• Updated “IP Worksheet” section.
• Updated Figure 3–1, Figure 3–2, Figure 3–21, and Table 3–2.
• Added Cyclone V device.
• Added Microsoft Excel 2010 support in “System Requirements” and
“Download and Install the PowerPlay Early Power Estimator”
sections.
August 2011
5.0
• Updated for the Quartus II software version 11.0 release to include
Arria V devices.
• Removed PowerPlay EPE spreadsheet version, power model status,
and supported feature information to the PowerPlay Early Power
Estimators (EPE) and Power Analyzer page of the Altera website.
May 2011
4.0
• Added “PLL Worksheet” section.
• Updated “Report Worksheet” section.
• Updated Figure 3–1, Figure 3–9, Figure 3–11, Figure 3–12, Figure 3–
13, Figure 3–15, Figure 3–16, and Figure 3–18.
December
2010
3.0
• Updated for the Quartus II software version 10.0 release.
• Added information about Arria II GZ devices.
• Updated Table 1–1, Table 1–2, and Table 1–3.
July 2010
2.0
Updated for the Quartus II software version 10.0 release:
• Added Stratix V device.
• Added “Report Worksheet”.
• Updated “System Requirements”, “Download and Install the
PowerPlay Early Power Estimator”, “Entering Information into the
PowerPlay Early Power Estimator”, and “Estimating Power
Consumption”
• Combining all the worksheets into “PowerPlay Early Power Estimator
Worksheets” chapter.
• Updated Table 1–2, Table 1–3, Table 7–2, and Table 11–1.
• Updated Figure 3–1.
• Minor text edits.
January 2010
1.1
Updated Table 1–2 and Table.
November
2009
1.0
Initial release.
A-2
Document Revision History for PowerPlay Early Power Estimator User Guide
UG-01070
2015.01.20
Altera Corporation
Additional Information for PowerPlay Early Power Estimator User Guide