Altera EthernetBlaster II - Manual (Page 31)

January 2014 Altera Corporation EthernetBlaster II Communications Cable User Guide
Additional Information
This chapter provides additional information about this user guide and Altera.
Document Revision History
The following table lists the revision history for this user guide.
How to Contact Altera
To locate the most up-to-date information about Altera products, refer to the
following table.
Typographic Conventions
The following table shows the typographic conventions this document uses.
Date Version Changes
January 2014 1.2 ■ Updated Table 3–1 .
June 2013 1.1
■ Removed reference to 5.0 V in “Power Requirements” on page 1–1.
■ Included reference to .tar.gz file in “Upgrading the Firmware” on page 2–6.
■ Removed references to 5.0-V value in Table 3–4 and Table 3–5 on page 3–4.
■ Updated Min and Max values in Table 3–5 on page 3–4.
August 2010 1.0 Initial release.
Contact (1) Contact Method Address
Technical support Website www.altera.com/support
Technical training
Website www.altera.com/training
Email [email protected]
Product literature Website www.altera.com/literature
Non-technical support (General) Email [email protected]
(Software Licensing) Email [email protected]
Note to Table:
(1) You can also contact your local Altera sales office or sales representative.
Visual Cue Meaning
Bold Type with Initial Capital
Letters
Indicate command names, dialog box titles, dialog box options, and other GUI
labels. For example, Save As dialog box. For GUI elements, capitalization matches
the GUI.
bold type
Indicates directory names, project names, disk drive names, file names, file name
extensions, software utility names, and GUI labels. For example, \qdesigns
directory, D: drive, and chiptrip.gdf file.