Altera Cyclone III FPGA Starter Kit - Manual (Page 16)

3–2 Altera Corporation
Cyclone III FPGA Starter Kit User Guide July 2010
LEDs and Buttons
You can locate the source for the example design in the path>\examples\cycloneIII_3c25_starter_board_standard directory.
1
To launch the control panel user interface, run the
control_panel.exe
program found in the <kit
path>\demos\control_panel directory ( Figure 3–1 ).
Figure 3–1. Control Panel Window
LEDs and
Buttons Illuminating LEDs
To illuminate an LED, follow these steps:
1. The LED & Buttons tab should be visible when the application runs.
If it is not visible, click the LED & Buttons tab (
Figure 3–2 ).
2. Click on LEDs to individually turn on the LEDs.