Pilz PSSu E PS-P +/-10V - Manual (Page 9)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
2-1
2.1 Module structure
2 Overview
2 2000 Overview Overview 2- 2.1 Module structure 2100 Module structure 2- ][BA bersicht Aufbau
A module consists of
 Electronic module and
 Base module with
– Screw terminals or
– Cage clamp terminals
The base modules are the carrier units for the electronic modules and
are used to connect the field wiring. The electronic modules are inserted
on to the base modules and determine the module's function.
Details of the base modules that can be used are available in the chapter
entitled “Intended Use”.
2.1.1 Module features
Module features 2- ][Merkmale_Versorgung Netzteil
 Primary side of power supply
– The external supply is fed to the base module terminals.
– Voltage: 24 V
][Merkmale_Versorgung 10/15 V  Secondary side of power supply
– The module supplies the output voltage to the base module termi-
nals.
– No buffer when the supply voltage is interrupted
– Voltage: 10 V/-10 V
– Max. continuous output: 10.0 W
– Max. current at 10 V: 1.0 A
– Max. current at -10 V: 0.5 A
][Merkmale_LED Netzteil  LED for:
– External voltage