Pilz PSSu E PS-P +/-10V - Manual (Page 15)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-1
4.1 Module features
4 Function description
4 4000 Function description Function description 4- 4.1 Module features 4100 Module features 4- 4.1.1 Integrated protection mechanisms
Integrated protection mechanisms 4- ][Schutzmechanismen Netzteil
The module has the following protection mechanisms:
 Short circuit-proof
 Temperature monitoring
– Shutdown in the case of overload
– Restart when the module has cooled down.
 The external supply and the module bus supplies are galvanically iso-
lated.
4.1.2 Function description
Function description 4- ][Funktionsbeschreibung Netzteil
The modules are typically used to supply periphery devices, such as:
 Rotary encoders
 Pressure gauges
 Transducers
 Potentiometers
Module supply
 The module needs no supply from the module supply.
 The module distributes the module supply on the module bus.
Periphery supply
 The module needs no supply from the periphery supply.
 The periphery supply is not available on the module's connection ter-
minals.
 The module distributes the periphery supply on the module bus.
External supplies
 The module provides connections for external supplies. The external
supplies are fed to the base module terminals.
 Please refer to the derating diagram.
 Primary side of power supply
– Voltage: 24 V
– Max. power consumption: 12.0 W
][Merkmale_Versorgung 10/15 V  Secondary side of power supply
– The module supplies the output voltage to the base module termi-
nals.
– No buffer when the supply voltage is interrupted
– Voltage: 10 V/-10 V
– Max. continuous output: 10.0 W
– Max. current at 10 V: 1.0 A
– Max. current at -10 V: 0.5 A