Pilz PSSu K S 16DO 0.5 - Manual (Page 9)

Safety
Operating Manual PSSu K S 16DO 0.5
22059­EN­07 9
3 Safety
3.1 Intended use
The module provides type 1 outputs in accordance with IEC 61131­2. It may be used to
switch:
} Resistive loads
} Inductive loads
} Capacitive loads
The module PSSu K S 16DO 0.5 may be used as a safety component in accordance with
the Lifts Directive 95/16/EC, EN 81­1, EN 81­2 and EN 115­1.
The programmable safety system should be installed in a protected environment that meets
at least the requirements of pollution degree 2. Example: Protected inside space or control
cabinet with protection class IP54 and corresponding air conditioning.
Intended use includes making the electrical installation EMC­compliant. Please refer to the
guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use
in an industrial environment. It is not suitable for use in a domestic environment, as this can
lead to interference.
The following is deemed improper use in particular:
} Any component, technical or electrical modification to the module
} Use of the module outside the areas described in this manual
} Any use of the module that is not in accordance with the technical details.
INFORMATION
The module is supported by:
} PSSuniversal Configurator and PSSuniversal Assistant from Version
1.8.1.
} PAS4000 from version 1.7.0
– We recommend that you always use the latest version (download
from www.pilz.de).
The PSSu K S 16DO 0.5 module may be used with the following connectors with spring­
loaded terminals:
} PSSu A Con 1/10 C
} PSSu A Con 3/30 C
WARNING!
The module may not be used in combination with PSSu E F BSW(­T) mod­
ules in safety­related applications.