Pilz PSSu K S 8DI 8DO 0.5 - Manual (Page 31)

Technical details
Operating Manual PSSu K S 8DI 8DO 0.5
22065­EN­07 31
Inputs 312431
Min. processing time of input when signal changes
from "1" to "0"
3,00 ms
Min. processing time of input when signal changes
from "0" to "1"
3,00 ms
Potential isolation between input and internal module
bus voltage
Yes
Semiconductor outputs 312431
Number of positive­switching single­pole semicon­
ductor outputs
8
Voltage 24 V DC
Typ. output current at "1" signal and rated voltage of
semiconductor output
0,50 A
Permitted current range 0,00 ­ 0,62 A
Residual current at "0" signal 0,02 mA
Max. transient pulsed current 6 A
Max. internal voltage drop 60 mV
Max. processing time of semiconductor output when
signal changes from "1" to "0"
0,500 ms
Max. processing time of semiconductor output when
signal changes from "0" to "1"
0,010 ms
Potential isolation between output and voltage for the
internal module bus
Yes
Potential isolation between semiconductor output and
input
Yes
Short circuit­proof Yes
Environmental data 312431
Climatic suitability EN 60068­2­1, EN 60068­2­14, EN 60068­2­2, EN
60068­2­30, EN 60068­2­78
Ambient temperature
In accordance with the standard EN 60068­2­14
Temperature range 0 ­ 60 °C
Storage temperature
In accordance with the standard EN 60068­2­1/­2
Temperature range ­25 ­ 70 °C
Climatic suitability
In accordance with the standard EN 60068­2­30, EN 60068­2­78
Humidity 93 % r. h. at 40 °C
Condensation during operation Not permitted
EMC EN 55011: class A, EN 61000­4­11, EN 61000­4­2,
EN 61000­4­3, EN 61000­4­4, EN 61000­4­5, EN
61000­4­6, EN 61000­4­8, EN 61000­4­9
Vibration
In accordance with the standard EN 60068­2­6
Frequency 10,0 ­ 150,0 Hz
Amplitude 0,35 mm
Acceleration 1g