Pilz PSSu K S 8DI 8DO 0.5 - Manual (Page 18)

Installation
Operating Manual PSSu K S 8DI 8DO 0.5
22065­EN­07 18
5.3 Install/uninstall connector
We recommend that the connectors with spring­loaded terminals are wired before they are
plugged in.
Please note:
} All contacts should be protected from contamination.
} The mechanics of the connector are designed for 25 plug in/out cycles.
Installation procedure:
} Plug the connector into the required connector strip until you hear it lock into position
[1].
INFORMATION
The two locking levers automatically hook into place when plugged in. As a
result the connector is firmly connected to the module.
Schematic representation:
[1]
Uninstallation procedure:
} Push both locking levers to the left, as far as they will go [1].
INFORMATION
This will automatically lift the connector, which can then be removed from
the module.