Pilz PSSu E AI SHT1 - Manual (Page 9)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
2-1
2.1 Module structure
2 Overview
2 2000 Overview Overview 2- 2.1 Module structure 2100 Module structure 2- ][BA Übersicht Aufbau
A module consists of
 Electronic module and
 Base module with
– Screw terminals or
– Cage clamp terminals
The base modules are the carrier units for the electronic modules and
are used to connect the field wiring. The electronic modules are inserted
on to the base modules and determine the module's function.
Details of the base modules that can be used are available in the chapter
entitled “Intended Use”.
2.1.1 Module features
Module features 2- Geraetemerkmale_Zusatz BA Einleitung
The product has the following features:
][Merkmale_Ein_Aus SHT1  1 Analogue current input
Current range:
0 … 0.6 A, single-pole, referenced to earth
 2 analogue current outputs
Current range:
0 .. 20mA, single-pole, referenced to earth
– Scaling of input current 1:100 and 1:200
– Evaluation via analogue input module with an input resistance =
115 Ohm, (e.g. PSSu E F AI I)
][Geraetemerkmal_T  T-type:
PSSu E AI SHT1-T: for increased environmental requirements
][Merkmale_Zusatz ST/FS-Module Sys B  For standard and failsafe applications in system environment B