Pilz PSSu E AI SHT1 - Manual (Page 13)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1 Intended use
3 Safety
3 3000 Safety Safety 3- 3.1 Intended use 3100 Intended use 3- ][Gertebeschreibung SHT
The module provides shunts to scale the current for analogue inputs.
The module may be used in conjunction with analogue current inputs
(e.g. PSSu E F AI I).
][Gerätebeschreibung ST-Module Sys A + B
The module may be used for standard applications in system environ-
ment A and B.
Bestimm_Verwend_Zusatz-(T)
The module PSSu E AI SHT1-T is suitable for use where there are in-
creased environmental requirements (see Technical Details).
Bestimmung/Gertebeschreibung_Ausschluss
Intended use includes making the electrical installation EMC-compliant.
Please refer to the guidelines stated in the "PSSuniversal Installation
Manual". The module is designed for use in an industrial environment. It
is not suitable for use in a domestic environment, as this can lead to in-
terference.
The following is deemed improper use in particular:
 Any component, technical or electrical modification to the module
 Use of the module outside the areas described in this manual
 Use of the module outside the technical details (see chapter entitled
"Technical Details")
Bestimm_Verwend_Basismodule
The PSSu E AI SHT1 module may be used in conjunction with the fol-
lowing base modules:
Bestimm_Basismodule Ser  PSSu BP 1/8S
 PSSu BP 1/8C
 PSSu BP 1/12S
 PSSu BP 1/12C
 PSSu BP-C 1/8S
 PSSu BP-C 1/8C
 PSSu BP-C 1/12S
 PSSu BP-C 1/12C
Bestimm_Verwend_Basismodule-T
The module PSSu E AI SHT1-T may be used in conjunction with the fol-
lowing base modules:
Bestimm_Basismodule Ser-T  PSSu BP 1/8S-T
 PSSu BP 1/8C-T
 PSSu BP 1/12S-T
 PSSu BP 1/12C-T
 PSSu BP-C 1/8S-T
 PSSu BP-C 1/8C-T
 PSSu BP-C 1/12S-T
 PSSu BP-C 1/12C-T