Pilz PNOZ m EF 4DI4DOR - Manual (Page 12)

Commissioning
Operating Manual PNOZ m EF 4DI4DOR
1002702­EN­02 12
6 Commissioning
6.1 Wiring
The wiring is defined in the circuit diagram of the PNOZmulti Configurator.
Please note:
} Information given in the "Technical details" must be followed.
} Use copper wire that can withstand 75°C.
6.2 Download modified project to the PNOZmulti safety system
As soon as an additional expansion module has been connected to the system, the project
must be amended using the PNOZmulti Configurator. Proceed as described in the operat­
ing instructions for the base unit.
NOTICE
For the commissioning and after every program change, you must check
whether the safety devices are functioning correctly.
6.3 Connection
input circuit Single­channel Dual­channel
Example:
Emergency stop
without detection of shorts across
contacts
S1
I0 L+
S1
I1
I0 L+
L+
Example:
Emergency stop
with detection of shorts across
contacts
I0
T0
S1 S1
T1
I1
T0
I0
Connection examples for the input circuit
Dual output
O1 (3) K1
L1
N
K2
14 (34)
13 (33)
23 (43)
24 (44)
O0 (2)