Pilz PNOZ mc12p Powerlink - Manual (Page 7)

Safety
Operating Manual PNOZ mc12p
1003016-EN-01
7
Safety
Intended use
The fieldbus module PNOZ mc12p is an expansion module of the configurable control sys-
tem PNOZmulti. It is used for communication between the configurable control system
PNOZmulti and
Ethernet POWERLINK. Ethernet POWERLINK is designed for fast data
exchange at field level. The expansion module PNOZ mc12p is a passive subscriber (Con-
trolled Node) of Ethernet POWERLINK . The basic communication functions with Ethernet
POWERLINK conform to the System Description published by the POWERLINK User
Group (EPSG). The central controller (Managing Node) reads input information from the
slaves and writes output information to the slaves as part of each cycle. As well as the cy-
clical transfer of usable data, the expansion module
PNOZ mc12p also has diagnostic and
commissioning functions.
The expansion module may only be connected to a base unit from the configurable control
system PNOZmulti (please refer to the document "PNOZmulti System Expansion" for de-
tails of the base units that can be connected)
The configurable control system PNOZmulti is used for the safety-related interruption of
safety circuits and is designed for use in:
} E-STOP equipment
} Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1
The expansion module may not be used for safety-related functions.
Intended use includes making the electrical installation EMC-compliant. The product is de-
signed for use in an industrial environment. It is not suitable for use in a domestic environ-
ment, as this can lead to interference.
The following is deemed improper use in particular:
} Any component, technical or electrical modification to the product
} Use of the product outside the areas described in this manual
} Use of the product outside the technical details (see chapter entitled “Technical De-
tails”)
System requirements
Please refer to the "Product Modifications" document in the "Version overview" section for
details of which versions of the base unit and PNOZmulti Configurator can be used for this
product.
Safety regulations
Use of qualified personnel
The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
3
3.1
3.2
3.3
3.3.1