Pilz PNOZ mc3p Profibus 2 - Manual (Page 23)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-1
7.1 Messages
7 Operation
7 7000 Operation Operation 7- 7.1 Messages 7100 Messages 7- Betrieb_Meldungen_allgemein_BA
When the supply voltage is switched on, the PNOZmulti safety system
copies the configuration from the chip card.
The LEDs "POWER","DIAG", "FAULT", "IFAULT" and "OFAULT" light up
on the base unit.
Betrieb_Meldungen_Feldbus_Profibus
The expansion module PNOZ mc3p is configured and started automat-
ically. The "ONLINE" and "OFFLINE" LEDs indicate the status of the
PNOZ mc3p on PROFIBUS-DP.
If the expansion module PNOZ mc3p does not receive a configuration
from the base unit for a period of 30 s, the expansion module
PNOZ mc3p connects to PROFIBUS-DP and "ONLINE" status is dis-
played on PROFIBUS-DP. The error message "External Error" is sent to
the Master.