Pilz PNOZ mc7p CC-Link coated version - Manual (Page 5)

Overview
Operating Manual PNOZ mc7p
1003050-EN-01
5
Overview
Scope of delivery
} Expansion module PNOZ mc7p
} Jumper 774 639
Unit features
Using the product PNOZ mc7p:
Expansion module for connection to a base unit from the configurable control system
PNOZmulti
The product has the following features:
} Can be configured in the PNOZmulti Configurator
} Connection for CC-Link
} Station addresses from 0 ... 63, selected via rotary switch
} Station type: Remote Device
} Occupied stations: 2
} 24 virtual inputs and outputs on the control system PNOZmulti can be defined in the
PNOZmulti Configurator for communication with the fieldbus CC-Link . The number of
inputs and outputs can be extended to 128. Please note that when the extended inputs
and outputs 24 - 127 are used they have different properties (see document entitled
"Communication Interfaces").
} Max. 1 PNOZ mc7p can be connected to the base unit
} Please refer to the document "PNOZmulti System Expansion" for the PNOZmulti base
units that can be connected
2
2.1
2.2