Pilz PNOZ mo4p 4n/o - Manual (Page 23)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-1
7.1 Messages
7 Operation
7 7000 Operation Operation 7- 7.1 Messages 7100 Messages 7- Betrieb_Meldungen_allgemein_BA
When the supply voltage is switched on, the PNOZmulti safety system
copies the configuration from the chip card.
The LEDs "POWER","DIAG", "FAULT", "IFAULT" and "OFAULT" light up
on the base unit.
Betrieb_Meldungen_Relaisausgangsmod_BA
The PNOZmulti safety system is ready for operation when the "POWER"
and "RUN" LEDs on the base unit are lit continuously.
7.1.1 Display elements
Display elements 7- Anzeige Legende 3x
Legend:
7.1.1.1 Display elements for device diagnostics
Display elements for device diagnostics 7- Betrieb_Anzeige_Relaisausgangsmodul_BA
LED on
LED flashes
LED off
Basic Relay output
module Errors
Input Ix RUN DIAG FAU
L
T
IFAULT OFAULT CI CO FAU
L
T
IN/OUT
External error on the output, e.g. defective feedback
loop
Internal error on the expansion module