Pilz PNOZ mo4p 4n/o - Manual (Page 11)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1 Intended use
3 Safety
3 3000 Safety Safety 3- 3.1 Intended use 3100 Intended use 3- Bestimmung/Gertebeschreibung_multi_Zusatz_Modul
The expansion module may only be connected to a base unit from the
PNOZmulti modular safety system.
Bestimmung/Gertebeschreibung_multi_System
The modular safety system PNOZmulti is used for the safety-related in-
terruption of safety circuits and is designed for use on:
 E-STOP equipment
 Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1
Bestimmung/Gertebeschreibung_Zusatz_Coated Version
The coated version of the product PNOZ mo4p is suitable for use where
there are increased environmental requirements (see Technical Details).
Bestimmung/Gertebeschreibung_EMV+Ausschluss
Intended use includes making the electrical installation EMC-compliant.
The product is designed for use in an industrial environment. It is not
suitable for use in a domestic environment, as this can lead to interfer-
ence.
The following is deemed improper use in particular:
 Any component, technical or electrical modification to the product
 Use of the product outside the areas described in this manual
 Use of the product outside the technical details (see chapter entitled
“Technical Details”)
3.1.1 System requirements
System requirements 3- Systemvoraussetzungen - Verweis auf Produktänderungen
Please refer to the "Product Modifications" document in the "Version
overview" section for details of which versions of the base unit and
PNOZmulti Configurator can be used for this product.