Pilz PNOZ mmc11p CAT - Manual (Page 6)

Overview
Operating Manual PNOZ mmc11p
1002697-EN-01
6
Overview
Scope of supply
} Expansion module PNOZ mmc11p
} Jumper 779 260
Unit features
Using the product PNOZ mmc11p:
Expansion module for connection to a base unit from the configurable control system
PNOZmulti Mini .
The product has the following features:
} Can be configured in the PNOZmulti Configurator
} Network protocols: EtherCAT
} Supports CANopen over EtherCAT (DS301 V4.02 compliant)
} Status indicators for communication with EtherCAT and for errors
} 24 virtual outputs on the control system PNOZmulti can be defined in the PNOZmulti
Configurator for communication with the fieldbus EtherCAT. The number of inputs and
outputs can be extended to 128. Please note that when the extended inputs and
outputs 24 - 127 are used they have different properties (see document entitled "Com-
munication Interfaces").
} Max. 1 PNOZ mmc11p can be connected to the base unit
} Plug-in connection terminals:
either spring-loaded terminal or screw terminal available as an accessory (see order
reference)
} Please refer to the document "PNOZmulti System Expansion" for details of the base
units PNOZmulti Mini that can be connected.
2
2.1
2.2